Baby Lock Destiny BLDY Instruction And Reference Manual Download Page 151

Page: 151 / 225

CREATING FILL IMAGE

344

Press .

In this screen, the pattern can be resized, rotated or
moved.

→

The pattern design editing screen for IQ Designer
appears.

To return to the previous screen, press

Follow the procedure described on
page 210 to edit the pattern as desired.

The original image is displayed in the background.
Use gauge

to adjust the transparency of the

background. Each press of

lightens the

background, making the illustration pattern darker.

Each press of

darkens the background, making

the illustration pattern lighter.

Note

• During scanning, the small dots that appear

and unnecessary lines can be erased.

Summary of Contents for Destiny BLDY


































































































































































































































Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands

Baby Lock Destiny BLDY, Instruction And Reference Manual

Search results

Summary of Contents for Destiny BLDY

Reviews:

Related manuals for Destiny BLDY

Brands by name

Popular brands