Axis 26123R1, Integrator And User’S Manual, Page: 8 / 77

8
AXIS 282/282A - Product Description
Control button
- Press this button to restore the factory default settings, as described in
Resetting to the Factory Default Settings, on page 57, or to install using AXIS Internet
Dynamic DNS Service (page 14).
Flash button - The AXIS 282/282A has a flash button. However, it is only used for
firmware programming in the factory. It is not used when upgrading the firmware!
Network connector - The AXIS 282/282A connects to the network via a standard network
cable, and automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet).
AXIS 282/282A Bottom
Status LED
Network LED
Power LED
LED indicators
- After completion of the startup and self-test routines, the multi-colored
Status, Network, and Power idicators flash as follows:
Unlit When configured for “no flash” on camera access.
Green Steady for normal operation. Can be configured to flash green at intervals
whenever the camera is accessed. See the online help for more information.
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Unlit No connection
Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Red Flashes rapid red for hardware error, together with the Status indicator
Green Normal operation
Amber Flashes green/amber during firmware upgrade
Status
Network
Power