manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 62 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 62

 

62 

AXIS 282/AXIS 282A - Troubleshooting

Emergency Recovery Procedure

If power or the network connection to the AXIS 282/AXIS 282A is lost during the upgrade, 

the process will fail and the unit will become unresponsive. A flashing red Status LED 

indicates a failed upgrade. To recover the unit, follow the steps below. The serial number is 

located on the memory capsules on top of the AXIS 282/282A..

1.

Unix/Linux

 - From the command line, type the following:

 

arp -s <IP address of AXIS 282/AXIS 282A> <Serial number> temp

 

ping -s 408 <IP address of AXIS 282/AXIS 282A>

 

 

Windows

 - From a command/DOS prompt, type the following:

 

arp -s <IP address of AXIS 282/AXIS 282A> <Serial number>

 

ping -l 408 -t <IP address of AXIS 282/AXIS 282A>

 

2. If the unit does not reply within a few seconds, restart it and wait for a reply. Press 

CTRL+C to stop Ping.

3. Open a browser and type in the AXIS 282/AXIS 282A’s IP address. In the page that 

appears, use the 

Browse

 button to select the upgrade file to use, e.g. axis282qa.bin or 

axis282sa.bin. Then click the 

Load

 button to restart the upgrade process. 

4. After the upgrade has completed (1-10 minutes), the unit will automatically restart and 

show a steady green on the Power and Status LEDs and flashing green or amber on the 

Network LED. 

5. Reinstall the AXIS 282/AXIS 282A. 

If the emergency recovery procedure does not get the AXIS 282/AXIS 282A up and 

running again, please contact Axis support at www.axis.com/techsup/ 

Support

If you contact Axis support, please help us help you resolve your problems expediently by 

providing a server report, log file and a brief description of the problem.

Server Report 

- go to 

Setup > System Options > Support Overview

. The server report 

contains important information about the server and its software, as well as a list of the 

current parameters.

Log file

 - go to 

Setup > System Options > Logs & Reports

. The Log file records events 

within the unit since the last restart of the system and can prove a useful diagnostic tool 

for troubleshooting.

Summary of Contents for 26123R1














































































Reviews:

No comments