manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 47 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 47

 

47 

AXIS 282/AXIS 282A - Pan Tilt Zoom

OSD Menu

 - If the PTZ unit supports an internal configuration menu, this can be accessed 

using the On-Screen Display (OSD). Configure the analog camera by opening and 

navigating through its internal menu in this display.

PTZ Control Queue 

Use the PTZ Control Queue window to enable and disable PTZ queueing. This window 

allows you to set up a queue for viewers wanting to access the AXIS 282/AXIS 282A, and 

limits the number of viewers and the length of time each viewer can access and control the 

video stream. For more information on how to set up the control queue, please see the 

online help.

Note also that a viewer who belongs to a group (see 

 Users

, on page 49) that has a higher 

PTZ priority can go in front of other users in the queue and take control of the AXIS 

282/AXIS 282A. 

The order of priority for taking control of the queue is listed below:

Summary of Contents for 26123R1














































































Reviews:

No comments