Axis 26123R1, Integrator And User’S Manual, Page: 53 / 77

53
AXIS 282/AXIS 282A - System Options
Link-Local Address
This is enabled by default and assigns the AXIS 282/AXIS 282A an additional IP address
for use with UPnP™. The AXIS 282/AXIS 282A can have both a Link-Local IP and a
static/DHCP-supplied IP address at the same time - these will not affect each other.
HTTP
The default HTTP port number (80) can be changed to any port within the range
1024-65535. This is useful for e.g. simple port mapping.
HTTPS
The default HTTP port number (443) can be changed to any port within the range
1024-65535. This is useful for e.g. simple port mapping.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP
port number to use. The default setting is 554.
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is automatically
selected. If necessary, you can set the connection speed by selecting it from the drop-down
list.
Maximum bandwidth - Specify, in Mbit/s or kbit/s, the maximum bandwidth that the
Video Server is allowed to use on your network. This is a useful function when connecting
your Video Server to busy or heavily loaded networks. The default setting is Unlimited .
Note:
When using MPEG-4 as the video format, remember that setting a maximum bandwidth value here may
create problems for individual video streams if the maximum value is less than the sum of the bit rates set
for the video streams.
For more information, please see the online help
SOCKS
SOCKS is a networking proxy protocol. The AXIS 282/AXIS 282A can be configured to use
a SOCKS server to reach networks on the other side of a firewall/proxy server. This
functionality is useful if the Video Server is located on a local network behind a firewall,
but notifications, uploads, alarms, etc., need to be sent to a destination outside the local
network (e.g. to the Internet).