manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 61 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 61

 

61 

AXIS 282/AXIS 282A - Troubleshooting

Troubleshooting

Checking the Firmware

Firmware is software that determines the functionality of the AXIS 282/AXIS 282A. One of 

your first actions when troubleshooting a problem should be to check the currently 

installed version. The latest version may contain a correction that fixes your particular 

problem. The current firmware version in your AXIS 282/AXIS 282A can be seen under 

Setup > Basic Configuration.

Upgrading the Firmware

When you download firmware from the Axis Web site, your Axis product will receive the 

latest available functionality. Always read the upgrade instructions and release notes 

available with each new release, before updating the firmware.

New firmware can be downloaded to the AXIS 282/AXIS 282A over the network.

Note: 

Pre-configured and customized settings will be retained for use when the new firmware is running (pro-
vided the features are available in the new firmware) although this is not guaranteed by Axis Communica-
tions. 

1. Save the firmware file to your computer. The latest version of the AXIS 282/AXIS 

282A firmware is available free of charge from the Axis Web site at 

www.axis.com/techsup

 or from your local distributor.

2. Go to 

Setup > System Options > Maintenance

 in the Video Server’s Web pages.

3. In the 

Upgrade Server

 section and browse to the desired firmware file on your 

computer. Click 

Upgrade

.

Notes: 

•Always read the upgrade instructions available with each new release, before updating the firm-

ware.

•After starting the process, you should always wait at least 20 minutes before restarting the AXIS 

282/AXIS 282A, even if you suspect the procedure has failed.

•Your dealer reserves the right to charge for any repair attributable to faulty updating by the 

user.

Summary of Contents for 26123R1














































































Reviews:

No comments