manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 36 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 36

 

36 

AXIS 282/AXIS 282A - Live View Config

HTML Examples

You can add live video from your AXIS 282/AXIS 282A to your own web site. The AXIS 

282/AXIS 282A can send Motion-JPEG or MPEG-4 images to up to 20 simultaneous 

connections, although an administrator can restrict this to fewer. This does not affect or 

include the number of multicast viewers.

Enter the 

Image Type

, 

Image size

 and other settings to suit your web page and click 

Update.

External Video

You can add links to other Axis network devices available over the network. These sources 

can be displayed on the Live View page, just as if they were video sources connected 

directly to the AXIS 282/AXIS 282A.

Click the 

Add

 button to open the External Video Source Setup dialog, which is used to 

make all the necessary settings.

Example of a path to an external video source:

Sequence Mode

The live view page can be configured to rotate through selected internal and/or external 

video sources, in order or randomly. PTZ preset positions can also be included.

Select the desired video sources and enter the time in seconds to display each source (up to 

59 minutes). Click 

Save

.

The Sequence buttons will appear on the Live View page 

to allow the viewer to start and stop the sequence mode.

Please see the online help

for more information.

http://192.168.0.125/axis-cgi/mjpeg/video.cgi

Summary of Contents for 26123R1














































































Reviews:

No comments