Axis 26123R1, Integrator And User’S Manual, Page: 54 / 77

54
AXIS 282/AXIS 282A - System Options
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the
fields provided, to enable event and error email messages from the Video Server to
predefined addresses, via SMTP.
If the mail server requires SMTP authentication, check the box for
Use authentication to
log in to this server
and enter the user name and password used for logging in. Several
different methods of authentication are available. See the online help for more
information.
SNMP
The Simple Network Management Protocol (SNMP) allows the remote management of
network devices. Select the version of SNMP to use, depending on the level of security
required. Select the version of SNMP to use, by checking the appropriate box. The three
levels of security are:
• SNMP V1 - includes no security
• SNMP V2c - uses very simple security, e.g. community name as password
• SNMP V3 - provides encryption and secure passwords. Use with HTTPS.
If using V1 and V2c, enter the community name for read-only access to all supported
SNMP objects (except the root password and other objects that require write access).
Default value = public. You can also specify the community name for read/write access to
all supported SNMP objects (except read-only objects). Default value = pass.
If using HTTPS enter the password if it has not already been set. To set the password again,
the AXIS 282/AXIS 282A must be reset to the factory default settings.
UPnP™
The Video Server includes support for UPnP
™
in Windows ME and Windows XP. UPnP
™
is
enabled by default.
Note:
UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel
from the
Start Menu
and select
Add/Remove Programs
. Select
Add/Remove Windows Components
and
open the Networking Services section. Click Details and then select UPnP ™ as the service to add.
RTP/MPEG-4
These settings are the IP address, port numbers, and Time-To-Live values to use for the
media stream(s) in the MPEG-4 format. Only certain IP addresses and port numbers should
be used for these streams. For more information, please see the online help.