manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 20 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 20

 

20 

AXIS 282/AXIS 282A - Video and Audio Streams

How to stream MPEG-4

Deciding on the combination of protocols and methods to use depends on your viewing 

requirements, and on the properties of your network. Setting the preferred method(s) is 

done in the control applet for AMC, which is found in the Windows Control Panel. When 

this has been set, AMC will test all the selected methods in the specified order, until the 

first functioning one is found.

RTP+RTSP 

This method (actually RTP over UDP and RTSP over TCP) should be your first 

consideration for live video, especially when it is important to always have an up-to-date 

video stream, even if some images do get dropped. This can be configured as multicast or 

unicast. 

Multicasting provides the most efficient usage of bandwidth, especially when there are 

large numbers of clients viewing simultaneously. Note however, that a multicast broadcast 

cannot pass a network router unless the router is configured to allow this. It is thus not 

possible to multicast over e.g. the Internet. 

Unicasting should be used for video-on-demand broadcasting, so that there is no video 

traffic on the network until a client connects and requests the stream. However, if more 

and more unicast clients connect simultaneously, the server will at some point become 

overloaded. There is also a maximum of 20 simultaneous viewers to be considered.

RTP/RTSP

This unicast method is RTP tunneled over RTSP. This can be used to exploit the fact that it 

is relatively simple to configure firewalls to allow RTSP traffic.

RTP/RTSP/HTTP or RTP/RTSP/HTTPS

These two methods can also be used to traverse firewalls. Firewalls are commonly 

configured to allow the HTTP protocol, thus allowing RTP to be tunneled.

The AXIS Media Control 

The recommended method of accessing live video (MPEG-4 and/or Motion JPEG) and 

audio from the AXIS 282/AXIS 282A is to use the AXIS Media Control (AMC) in Microsoft 

Internet Explorer in Windows. This ActiveX component is automatically installed on first 

use, after which it can be configured by opening the AMC Control Panel applet from the 

Windows Control Panel. Alternatively, right-click the video image in Internet Explorer.

Summary of Contents for 26123R1














































































Reviews:

No comments