Axis 26123R1 Integrator And User’S Manual Download Page 66

Page: 66 / 77

AXIS 282/AXIS 282A - Technical Specifications

Technical Specifications

Item

Specification

Models

• AXIS AXIS 282: 1-channel bare board video server
• AXIS AXIS 282A: 1-channel bare board video server with two-way audio

Video compression

• Motion-JPEG
• MPEG-4 Part2 (ISO/IEC 14496-2), Profiles: ASP and SP

Resolutions

• 4CIF, 2CIF Expanded, 2CIF, CIF, QCIF
• Maximum 704x480 (NTSC) 768x576 (PAL)
• Minimum 160x120 (NTSC) 176x144 (PAL)

Frame rates

(NTSC/PAL)

• Motion JPEG: Up to 30/25 fps at 4CIF
• MPEG-4: Up to 30/25 fps at 2CIF
• MPEG-4: Up to 20/17 fps at 4CIF

Video streaming

• Simultaneous Motion JPEG and MPEG-4
• Controllable frame rate and total bandwidth
• Constant and variable bit rate (MPEG-4)

Image settings

• Compression levels: 11 (Motion JPEG), 23 (MPEG-4)
• Rotation: 90

, 180

, 270

• Aspect ratio correction
• Color and black/white
• Overlay capabilities: time, date, text, image or privacy mask
• Deinterlacing filiter

Audio features

AXIS 282A only

• G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s, full duplex, half duplex, simplex

or audio off

Security

• Multiple user levels with password protection
• IP address filtering
• HTTPS encryption

Alarm and event

management

• Events triggered by built-in motion detection, external inputs or according to a

schedule

• Image upload over FTP, email and HTTP
• Notification over TCP, email, HTTP and external outputs
• Pre- and post alarm buffer of 9 MB (approx. 4 min of CIF resolution video at

4 frames per second)

Pan/Tilt/Zoom

• A wide range of analog PTZ dome cameras are supported, free drivers available at

www.axis.com

• 20 presets, Guard tour, PTZ control queuefor all supported PTZ units available from

www.axis.com

Summary of Contents for 26123R1














































































Search results

Summary of Contents for 26123R1

Reviews:

Axis 26123R1, Integrator And User’S Manual, Page: 66 / 77

Search results

Summary of Contents for 26123R1

Reviews: