Axis 26123R1, Integrator And User’S Manual, Page: 12 / 77

12
AXIS 282/282A - Installation
ARP and Ping in Windows
Assign your product a unique IP address from a computer on your network as follows:
1. Acquire an unused IP address for the AXIS 282/282A from your network
administrator.
2. Connect the AXIS 282/282A to the network using a standard network cable.
3. Find the serial number (S/N) located on the memory capsules on top of the AXIS
282/282A.
4. From a computer on your network, open a Command Prompt, i.e. from the Windows
Start menu, select Run... and type cmd ( command in Windows 98/ME). Click OK .
5. Enter the commands:
Syntax:
Example
6. Start/restart the AXIS 282/282A. This must be done no later than 2 minutes after
entering the ARP and Ping commands.
7. When ‘Reply from 192.168.0.125: ...’ is displayed (approximately 10-15 seconds), type
Ctrl+C
to stop Ping.
8. Start a browser and enter the IP address in the Address/Location field.
9. Press
Enter .
10. Enter a password for the root user (administrator).
11. If required, accept the installation of
AMC
onto your workstation.
Note:
AMC must be installed to view live video images in Microsoft Internet Explorer. If your working environ-
ment restricts additional software components, you can configure your AXIS 282/282A to use a Java applet
for updating the images. See the help file under
Live View Config > Layout > Default Viewer for Internet
Explorer
for information. Or use another supported Web browser, see Technical Specifications , on page 66.
12. The installation is now complete. Proceed to Using the Video Server , on page 15.
arp -s <IP address> <Serial number>
ping -l 408 -t <IP address>
Note: The ping command is
followed by -l (lower case L)