manualshive.com logo in svg

Axis 26123R1, Integrator And User’S Manual, Page: 33 / 77

Share
Download
Axis 26123R1 Integrator And User’S Manual Download Page 33

 

33 

AXIS 282/AXIS 282A - Live View Config

Live View Config

Layout

These are the tools for deciding 

the layout of the Live View page. 

The layout can be set in 3 ways:

• Use Axis look - the layout is 

unchanged.

• Use custom settings - modify 

the default page with your own 

colors, images etc. Click the 

Configure

 button and see the 

following page.

• Own Home Page - Upload and 

use your own custom made 

page as the default web page. 

Click the 

Configure

 button and 

see the following page.

The other settings on this page 

concern which other features to 

include, e.g. buttons and links. 

See page 34 for more information.

Customizing the 

default page

The appearance of 

the default AXIS 

282/AXIS 282A Live 

View page can be 

customized to suit 

your own 

requirements, or you 

can upload and use 

your own home 

page. 

To upload your 

own file

s, click the 

Upload/Remove

 

button 

and see the 

description below.

Note that the setup address is http://<ip address>/operator/basic.shtml

Summary of Contents for 26123R1














































































Reviews:

No comments