UMAX140610. LIN
– J1939 CAN Protocol Converter with PWM Output. Version 1
Page: 34-81
An application where this feature would be useful is filling a clutch when a transmission is
engaged. An example of some fill profiles is shown in the figure below.
Figure 18. Lookup Table Time Response Clutch Fill Profiles
In a time response, the interval time between each point on the X-axis can be set anywhere
from 1ms to 24 hours. [86,400,000 ms]
One final note about the Lookup Tables is that if a digital input is selected as the control source
for the X-Axis, only a 0 (Off) or 1 (On) will be measured. Ensure that the data range for the X-
Axis on the table is updated appropriately in this condition.
