UMAX140610. LIN
– J1939 CAN Protocol Converter with PWM Output. Version 1
Page: 61-81
The CAN network identification and “read-only” configuration parameters are not transferrable
using this operation. Also, the converter will perform one or several internal resets of all
function blocks during the setpoint flashing operation.
There can be small differences in configuration parameters between different versions of the
application firmware. It is recommended that the user manually inspect all configuration
parameters after flashing if the setpoint file was created by a different version of the application
firmware.
Figure 31. EA Setpoint File
A setpoint file containing default configuration parameters is available upon request.
4.4 Configuration Example
The converter should be configured to perform the required system functionality before being
used in the system. A detailed description of the converter configuration process for
communication between CAN and LIN is presented below, as an example.
