UMAX140610. LIN
– J1939 CAN Protocol Converter with PWM Output. Version 1
Page: 56-81
FMI=5, Current Below Normal Or Open
Circuit
FMI=6, Current Above Normal Or Grounded
Circuit
FMI=17, Data Valid But Below Normal
Operating Range
– Least Severe Level
FMI=15, Data Valid But Above Normal
Operating Range
– Least Severe Level
FMI=18, Data Valid But Below Normal
Operating Range
– Moderately Severe
Level
FMI=16, Data Valid But Above Normal
Operating Range
– Moderately Severe Level
FMI=21, Data Drifted Low
FMI=20, Data Drifted High
If the FMI used is anything other than one of those in the table above, then both the
low and high faults will be assigned the same FMI. This condition should be
avoided, as the log will still used different OC for the two types of faults, even
though they will be reported the same in the DTC.
It is the user’s responsibility
to make sure this does not happen.
