UMAX140610. LIN
– J1939 CAN Protocol Converter with PWM Output. Version 1
Page: 73-81
Now, the converter configuration is finished. All new settings are in the non-volatile memory.
You can test the new converter functionality by sending a LED control message on the CAN
bus. For example, a message with all intensity data fields set to 0xFA (maximum value) will
turn the module LED to the intense white color.
Figure 44. Example Configuration. Generating CAN Test Message
The LED will stay on for 1.5 seconds and then switch off, if the message is not being
retransmitted, as per the user requirements.
A setpoint file containing configuration parameters for this example is available upon request.
