AWB OD200-IDU, Operator'S Manual

Page: 84 / 114

Wi-Fi Settings
8-6
8
Figure 8-3. WEP Shared Key Security
Key 1 ~ Key 4 – Sets WEP key values. The user must first choose between ASCII
or Hexadecimal keys. At least one key must be specified. Each WEP key has an
index number. The selected key is used for authentication and encryption on the
Wi-Fi interface. Enter key values that match the key type and length settings.
(Default: Hex, 64 bits, no preset value)
• Key Type: Specifies keys as either ASCII or Hexadecimal values.
• Key Length: WEP keys can be set as 64, 128, or 152 bits in length.
• Key: Specify keys as either 5, 13, or 16 alphanumeric characters, or 10, 26, or 32
hexadecimal digits, depending on the selected key length.
Default Key Setting – Sets the WEP key used for authentication and encryption.
(Range: 1-4; Default: 1)
WPA/WPA2 Security
The WPA and WPA2 modes use IEEE 802.1X as their basic framework for user
authentication and dynamic key management. IEEE 802.1X access security uses
Extensible Authentication Protocol (EAP) and requires a configured Remote
Authentication Dial-in User Service (RADIUS) authentication server to be accessible
in the enterprise network. If you select WPA or WPA2 mode, be sure to configure the
RADIUS settings displayed on the page.
The WPA-WPA2-Mixed mode is a transitional mode of operation for networks
moving from WPA security to WPA2. WPA-WPA2-Mixed mode allows both WPA and
WPA2 clients to associate to a common Wi-Fi interface.