AWB OD200-IDU, Operator'S Manual

Page: 60 / 114

WiMAX Settings
6-2
6
Operator name – The WiMAX operator name. (Default: AWB)
Operator Restriction – When enabled, the user can only connect to the service
provider specified in the profile. The user cannot roam to other networks. When
disabled, the operator specified in the profile will be used when base stations are
detected, otherwise the user can roam to other networks. (Default: Disabled)
Scan Frequency – Specifies a center frequency to scan. (Range: 2000-4000 MHz)
FCC 2.3 GHz: 2305-2320 MHz, 2345-2360 MHz
FCC 2.5 GHz: 2496-2690 MHz
Taiwan NCC 2.5 GHz: 2500-2690 MHz
ETSI 3.5 GHz: 3400-3600 MHz
Support for full scan and partial scan by software
Scan Bandwidth – Specifies the bandwidth of the scan channel. (Options: 5.00,
7.00, 8.75, 10.00 MHz; Default: 10.00 MHz)
2.3 GHz model: 5, 8.75, and 10 MHz
2.5 GHz model: 5 and 10 MHz
2.3 GHz model: 5, 7, and 10 MHz
Add/Remove – Use the Add button to add a new center frequency and channel
bandwidth to scan. Use the Remove button to delete a frequency from the scan list.
Authentication
Set user authentication for the WiMAX connection profile, as specified by the service
provider. Selecting EAP-TLS, EAP-TTLS-CHAP, or EAP-TTLS-MSCHAPV2 displays
the parameters that are required for configuring the authentication method.
Figure 6-2 WiMAX Profile Authentication - EAP-TLS
3.5