Avtech AVD 714, User Manual

Page: 77 / 114

Video Viewer
67
Device
Select the device type ( CAMERA / PTZ ) according to the connected cameras for each
channel. Press “Edit” to enter the setting box as follows. When you finish the setting, click
Apply to confirm.
Item Description
Device Type Choose either normal camera or PTZ camera.
ID No. Set the ID number (0 ~ 255) of the connected PTZ camera.
Protocol Type Choose NORMAL or P-D protocol. It is recommended to select
PELCO-D protocol for the connected PTZ camera.
Baud Rate Set the baud rate of each channel (2400, 4800, 9600, 19200, 38400,
57600 / 115200).
Detection
Select the desired channel, and click Edit to enter the motion detection sensitivity and
area-setting page.
Item Description
DETECT Enable ( ON ) or disable ( OFF ) the function of “Motion
Detection”. If this function is enabled, you might need to set the
motion detection sensitivity or simply keep the default values.
For details, please see the description below.
Motion Detection
Sensitivity
(LS / SS / TS / RE) Set the detection sensitivity in 4 different adjustable factors (LS /
SS / TS / RE).
For details, please refer to “DETECTION” at page 39.
Alarm Select N.C. (normal closed) / N.O. (normal opened) / OFF for
the alarm polarity.
For N.C. / N.O. contact details, please refer to “APPENDIX 5 PIN
CONFIGURATION” at page 93.
Motion Detection Set the motion detection area by selecting the area grids with