Avtech AVD 714, User Manual

Page: 49 / 114

DVR Operation
39
Their default values are 128.
3) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When
this function is activated, the wording “COV.” will be shown on the channel screen.
4) REC
Select if you want to enable recording for the selected channel ( ON / OFF ). When
this function is activated, the symbol “ ” will be shown on the channel screen.
DETECTION
Select DETECTION to make detection-related settings.
DETECTION
TITLE DET AREA LS SS TS RE ALARM
CH1
ON SETUP 07 03 02 10 N.C.
CH2 OFF SETUP 07 03 02 10 OFF
CH3 OFF SETUP 07 03 02 10 OFF
CH4 OFF SETUP 07 03 02 10 OFF
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv
SELECT
s
BACK
t
NEXT
ENTER
1) TITLE
Show the camera title of each channel set up in the menu “CAMERA”.
2) DET
Select if you want to activate the motion detection function for the selected
channel (
ON / OFF ).
3) AREA
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area
that is not being detected while the transparent blocks are the area under
detection.
Press “ENTER” to set up the detection area. You will see similar screens as the
following:
Transparent blocks are
the area under detection.
Press “ENTER” to confirm
the start area.
Press “LEFT” / “RIGHT” to choose
the width of the detection area.
Press “UP” / “DOWN” to
choose the height of the area.