Avtech AVD 714, User Manual

Page: 69 / 114

Video Viewer
59
‧
Pre- / post-alarm record time
Select the pre-/post-alarm recording time from 0 sec. to 60 sec.
‧
Record time setting
There are two ways to set the record time: Weekly and Custom.
Weekly
Click Weekly tab, and you will see a weekly time table indicating the week days (Mon ~
Sun) and hours (0 ~ 24), similar to the figure below:
X axis 0 ~ 24 hours. Each time interval within a square is 15 minutes.
Y axis Monday ~ Sunday.
Operation You can set the record schedule for 3 record types as needed in this time
table:
1st timeline -- Manual record, indicated in yellow.
2nd timeline -- Alarm record, indicated in magenta.
3rd timeline -- Motion record, indicated in cyan.
Click and hold the start time point, and drag to the end time point to set the record time
range.
Custom
Click Custom tab, and you can set a more specific record time range for the 3 record
types: Schedule, Motion, and Alarm.
How to add a new time setting
Step1: Check the record type you want to schedule the recording.
Step2: Set the start time (From) and end time (To).
Step3: Click Add to add the time range you just set into the schedule table. Before
adding the time range, you will be prompted to confirm as follow: