Avtech AVD 714, User Manual

Page: 47 / 114

DVR Operation
37
1) X axis
0 ~ 24 hours. Each time interval within a square is two hours (divided into four 30-minutes).
2) Y axis
Monday ~ Sunday
3) Operation
Move to the start time point, and press “ENTER” to set the start time point (displayed in red).
Then, press
u
/
v
/
s
/
t
to set the timer record schedule.
To finish the time setting, press “ENTER” again to create an ending time point (displayed in
yellow), and press “MENU” to exit.
For detection timer, the setting here is only for event record, but not for detection area
and function activation. For motion detection function setup and activation, please refer
to “DETECTION” at page 39.
7 7 . . 1 1 . . 4 4 . . D D a a t t e e & & T T i i m m e e
Move to , and you can set the date & time, date display format, and the daylight saving.
If the time and date settings return to their default values after the DVR is rebooted,
please charge the DVR for at least 24-48 straight hours. Please contact your local retailer
if the situation still occurs.
Please do not change the date & time setting while the recording is still on. If the date and
time are changed, it’s recommended to clear all HDD data before activating the recording
function in case the recording date & time are mixed with the previous setting.
QUICK START
CHANNEL TITLE ON
EVENT STATUS ON
DATE DISPLAY ON
IMAGE SIZE CIF
QUALITY BEST
IMAGE PER SECOND 100
RECORD TIMER OFF
DETECTION TIMER OFF
DATE 2008 / JUL / 01 09 : 00 : 00
FORMAT Y / M / D
DAYLIGHT SAVING OFF
ADVANCE
uv
SELECT
s
BACK
t
NEXT ENTER
1) FORMAT
Select the date format which suits your location the best: Y-M-D / M-D-Y / D-M-Y .
Y stands for “Year”; M stands for “Month”; D stands for “Date”.