manualshive.com logo in svg

Avocent DSView, Installer/User Manual, Page: 67 / 358

Share
Download
Avocent DSView Installer/User Manual Download Page 67

 Chapter 3: DSView Software Servers        

49

1.

From the side navigation bar, click 

Proxy Server

. The DSView Server Proxy Properties 

window will open.

a.

Type a new port number to use for DSView software client communication with the 
Avocent proxy to the logged in DSView software server.

NOTE:

 If DSView software clients are located on an external connection, the specified TCP/IP proxy port must 

be opened on your firewall.

b.

Select the type of Proxy Invocation:

•

Click 

Disable the proxy server

 to allow all internal and external DSView software 

clients to communicate directly with the managed appliances. (This is the default.)

•

Click 

Use the proxy server for all KVM and serial sessions

 to enable all DSView 

Clients to communicate with the managed appliances using the DSView software 
proxy server.

•

Click 

Use the proxy server only for clients not on the same network as this DSView 

Server

 to enable all external and internal clients on a different network than the cur-

rent DSView software server to communicate with the managed appliances using the 
DSView proxy server. All other external and internal clients will communicate 
directly with the managed appliances.

•

Click 

Use the proxy server only for clients connecting with the following addresses

 to 

enable only DSView software clients with IP addresses entered in the Address List to 
communicate with the managed appliances using the DSView proxy server. All other 
clients communicate directly with the managed appliances.

NOTE:

 Changing the Proxy Port or Proxy Invocation setting will disconnect active DSView software 

client sessions.

2.

Click 

Save

. A confirmation dialog box will appear.

3.

Click 

OK

 to save your changes.

-or-

Click 

Cancel 

to cancel the action.

Server trap destinations

To specify trap destinations:

1.

From the side navigation bar, click 

Trap Destinations

. The DSView Server Trap Destinations 

window will open.

2.

In each address field, type the IP addresses in standard dot notation (xx.xx.xx.xx) or the 
domain name for the computer that handle traps. Up to four computers may be specified.

3.

Click 

Save

 to store the trap information in the DSView software database on the host.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments