manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 56

38

        DSView Installer/User Guide

If the entered license is already in use on another dedicated server, you will receive a 
license violation when you log in, and you must then configure the server as a 
spoke server.

b.

Click 

Next

.

4.

The Type in Initial Administrator Account window opens.

5.

Type a username, a password and confirm the password of the user to whom you wish to give 
administrator privileges. Usernames are case sensitive and may contain up to 64 characters. 
The at (@) symbol may not be used. Passwords may contain 3-64 characters.

Click 

Next

.

6.

The Updating hub Configuration window will open with the message 

Request In Progress 

Please Wait

. The license key will be installed and a DSView software administrator account 

will be created. The built-in user groups will also be created. 

7.

The Completed Successful window will open when configuration is completed. Click 

Finish

.

8.

The User Login window will open in the DSView Explorer.

You may now log in using the username and password specified during configuration.

If you chose to configure the server as a spoke server in the Select DSView Server Role window or 
if you entered a duplicate software license key in the Type in Master License Key window, 
complete steps 9-13.

NOTE:

 The DSView management software versions of the spoke server and the hub server must match in order 

to register the spoke server. For example, you may not register a spoke server running DSView management 
software version 3.0 with a hub server running DSView management software 3.1.

9.

The Type in Hub Server Address and Port window will open.

Type the address of the DSView software hub server using standard dot notation (xx.xx.xx.xx) 
or type the DNS name in the Address field. Click 

Next

.

10. The Accept DSView Server Certificate window will open. Click 

Next

 to accept the certificate.

11. The Type in Hub Administrator Credentials window will open. Type a valid username and 

password for a user with DSView software administrator privileges on the DSView software 
hub server. Click 

Next

.

12. The Registering Spoke Server window will open with the message 

Request In Progress Please 

Wait

. The configuration of the spoke server will be saved to the database of the hub server and 

the spoke server’s certificates will be installed on the hub server.

13. The Completed Successful window will open when the spoke server has been added. 

Click

Finish

.

Upgrading the DSView software

When upgrading to a newer version of the DSView management software, it is recommended that 
all DSView software servers are upgraded at the same time. The DSView software hub server 
should be upgraded first, followed by each spoke server.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands