manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 208

190

        DSView Installer/User Guide

b.

The common file dialog box will appear, with the directory containing disk image files 
(that is, those ending in .iso or .img) displayed. Select the desired ISO or floppy image file 
and click 

Open

.

-or-

If the client workstation’s operating system supports drag-and-drop, select the desired ISO 
or floppy image file from the common file dialog box and drag it onto the Virtual Media 
dialog box.

c.

The file’s header is checked to ensure it is correct. If it is, the common file dialog box will 
close and the chosen image file will appear in the Virtual Media dialog box, where it can 
be mapped by clicking the 

Mapped

 checkbox.

d.

Repeat steps a through c for any additional ISO or floppy images you wish to add. You 
may add any number of image files (up to the limits imposed by memory), but you may 
only have one virtual CD or virtual mass storage mapped concurrently. 

If you attempt to map too many drives (one CD and one mass storage device) or too many 
drives of a particular type (more than one CD or mass storage device), a message will be 
displayed. If you still wish to map a new drive, you must first unmap an existing mapped drive, 
then map the new drive.

After a physical drive or image is mapped, it may be used on the target device.

To unmap a virtual media drive:

1.

In the Virtual Media dialog box, uncheck the 

Mapped

 checkbox next to the drive you wish 

to unmap.

2.

You will be prompted to confirm the unmapping. Click 

Yes

 to confirm or 

No

 to cancel.

3.

Repeat for any additional virtual media drives you wish to unmap.

To display virtual media drive details:

In the Virtual Media dialog box, click 

Details

. The dialog box expands to display the Details table. 

Each row indicates:

•

Target Drive - Name used for the mapped drive, such as Virtual CD 1 or Virtual CD 2. 

•

Mapped to - Identical to Drive information that appears in the Client View Drive column.

•

Read Bytes and Write Bytes - Amount of data transferred since the mapping.

•

Duration - Elapsed time since the drive was mapped.

To close the Details view, click 

Details

 again.

To reset all USB devices on the target device:

NOTE:

 The USB reset feature resets every USB device on the target device, including the mouse and keyboard. 

It should only be used when the target device is not responding.

1.

In the Virtual Media dialog box, click 

Details

.

2.

The Details View will appear. Click 

USB Reset

.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands