Avocent DSView Installer/User Manual Download Page 202

Page: 202 / 358

184

DSView Installer/User Guide

Click

to cancel the deletion.

Click

Close

to exit the Macro Groups dialog box.

To copy a macro group:

NOTE:

Macro groups cannot be copied if you are using the DSR Remote Operations software.

Select

Macros - Configure - Macro Groups

from the Video Viewer window menu.

-or-

Click the

Macro Groups

button.

The Macro Groups dialog box appears.

Select one of the following:

•

Select

All

to display both personal and global macros.

•

Select

Personal

to display personal macros only.

•

Select

Global

to display global macros only.

Select the desired macro from the Defined Groups list and then click

Copy

. The Copy Macro

Group dialog box will appear.

Type a 1-32 character name in the Name of copied macro group field.

Select whether you wish to make the copied macro group a personal or global macro from the
Macro Type area.

Click

to copy the macro group. The Copy Macro Group dialog box is closed and the cop-

ied macro group will appear in the Macro Groups dialog box.

-or-

Click

Cancel

to cancel the action.

Click

Close

to exit the Macro Groups dialog box.

To change the macro group to be displayed in the Macros menu:

NOTE:

The macro group displayed on the Macros menu cannot be changed if you are using the DSR Remote

Operations software.

Select

Macros - Configure - Macro Groups

from the Video Viewer window menu.

-or-

Click the

Macro Groups

button.

The Macro Groups dialog box appears.

Select one of the following:

•

Select

All

to display both Personal and Global Macro groups.

•

Select

Personal

to display Personal Macro groups only.

•

Select

Global

to display Global Macro groups only.

Select the macro group to be displayed from the Defined Groups list box.

Summary of Contents for DSView







































































































































































































































































































































































Search results

Summary of Contents for DSView

Reviews:

Brands by name

Popular brands

Avocent DSView, Installer/User Manual

Search results

Summary of Contents for DSView

Reviews:

Brands by name

Popular brands