manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 254

236

        DSView Installer/User Guide

NOTE:

 The merged target devices will contain the name of the first target device in the Target Device to Merge 

list. For example, if you are merging two target devices named TD1 and TD2, and TD2 is listed before TD1, the 
merged target device will be named TD2.

d.

Click 

Next

.

4.

The Confirm Target Device Merge window will open. Click 

Next

 to confirm merging the 

connection paths into the specified destination target device. See 

Managing Connections to 

Units

 on page 119 for more information.

5.

The Completed Successful window will open.

6.

Click 

Finish

. The Units Tools window will open.

Importing DSView 2.x software databases

The Import DSView 2.x software database tool allows you to import an existing DSView 2.x 
software database into the DSView software system. When a database is imported, the following 
items will be imported:

•

Units, including attached cascade switches, SPC devices and target devices

•

Users and user groups with unit access rights

•

Authentication services, including Windows NT domains, LDAP and local accounts

•

System settings, including the ability to display connected users, connection sharing, status 
polling and delay rates and when the audit log is deleted

The following actions occur when a DSView 2.x software database is imported into the DSView 
software system:

•

A global unit group is created in the system for each group found in the DSView 2.x software 
database. The DSView management software does not provide DSView 2.x software 
Topology unit group nesting. Unit group names added to the system are a concatenation of the 
hierarchical names found in the DSView 2.x software, including the truncation of names 
when necessary.

•

If a user had “admin” rights in the DSView 2.x software for all nodes in the tree (including the 
Topology node), the user will be added as a member and inherit the access rights of a DSView 
software administrator user group member in the DSView management software.

If a user had “admin” rights in the DSView 2.x software for all nodes in the tree except for the 
Topology node, the user will be added as a member and inherit the access rights of an 
appliance administrator user group member in the DSView management software.

If a user had any other type rights in the DSView 2.x software, the user will be added as a 
member of the user group in the DSView management software. Access rights are set for units 
to which the user has access as follows:

•

A user with “user” rights to a target device in the DSView 2.x software will be assigned 
the Establish Viewer Sessions access right in the DSView management software.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands