manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 192

174

        DSView Installer/User Guide

between thumbnails (Time Between Servers). During the delay, you will see the last thumbnail 
image for all devices in the scan sequence, though you won’t be logged into any devices.

When you first launch the Thumbnail Viewer, each frame will be filled with a white background 
until a device image is displayed. An indicator light at the bottom of each frame displays the device 
status. The default thumbnail size is based on the number of devices in the scan list.

Scan mode has a lower priority than an active connection. If you or another user are connected to a 
device, that device will be skipped in the scan sequence, and Scan mode will proceed to the next 
device unless the Shared Connections Automatically option has been selected, in which case target 
devices may be shared and will not be skipped in the scan sequence. No login error messages will 
appear. After your interactive session is closed, the thumbnail will be included in the scan 
sequence again.

You may disable a device thumbnail from the scan sequence. The thumbnail image remains, but it 
is not updated until it is once again enabled.

When running Scan mode, it is recommended that the following audit log events (enabled by 
default) are disabled in the DSView software system:

•

Appliance Change Of State

•

Appliance Viewer Session Started

•

Appliance Viewer Session Stopped

•

Viewer Session Started

•

Viewer Session Stopped

Each thumbnail scan will result in the logging of the above audit log events. The audit log could 
grow to a huge size if the events are enabled and Scan mode is left running continuously for a 
length amount of time.

Thumbnail Viewer features

Figure 6.4 shows the Thumbnail Viewer areas, and descriptions follow in Table 6.3.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands