
35
3 Driver Software Installation – Novell NetWare
10. Press Esc to close the display.
11. Press Esc to close the submenus until the menu
“Installation Options” is on top.
12. Select “Exit” to end INSTALL.
3.3.2.1 Configuring the ISDN-Controller
To configure the ISDN-Controller and its PC interface card,
proceed as follows:
1.
Enter the command
load inetcfg
at the system console.
2.
In the “Internetworking Configuration” menu, select
the item “Boards”.
A list of installed network adapters and ISDN-Control-
lers appears.
3.
Press Ins to add the AVM ISDN-Controller T1/T1-
B to the list.
4.
In the list of “Available Drivers”, select the driver
“WHMSCAPI”.
The “Board Configuration” menu appears.
5.
Enter a name for the ISDN-Controller, such as “AVMT1-
1”.
6.
Select the menu item “CAPI Board Options” and press
Return.
The “WHSMCAPI Board Configuration” menu appears.
7.
You are asked whether you want the CAPI driver to be
loaded automatically when the server is booted.
Select Yes.
8.
Now select the CAPI driver “AVMT1” and press Re-
turn.
The “CAPI Board Configuration” menu appears.