31
3 Driver Software Installation – Novell NetWare
At the end of the installation process, the Readme file
for the AVM ISDN-Controller T1/T1-B is displayed
on the screen.
10. Press Esc to close the display.
11. Press Esc to close the submenus until the menu
“Installation Options” is on top.
12. Select “Exit” to end INSTALL.
3.3.1.1 Configuring the ISDN-Controller
To configure the ISDN-Controller and its PC interface card,
enter the command
load t1setup
at the system console. A list of available ISDN-Controllers
with their I/O address and interrupt settings appears. To
configure a controller, select it in the list using the arrow
keys and then press Return.
To change the I/O address and interrupt level of the PC
interface card, move the highlight to the desired param-
eter, press Return and select the desired value from the
pop-up list. The I/O address 150 is the default value for the
first PC interface card installed.
Press Esc to close the configuration program. When
asked whether you want to save your changes, click on
Yes.
3.3.1.2 Loading and Unloading the ISDN-Controller
To load the Controller, enter the command
load capi20
at the system console and press Return. When the ISDN-
Controller has been loaded, the following message ap-
pears: