manualshive.com logo in svg

AVM T1, Manual, Page: 11 / 55

Share
Download
AVM T1 Manual Download Page 11

11

1 Introduction to the AVM ISDN-Controller T1/T1-B

protocols V.110, V.120 and ISO 3309 are also sup-
ported. The ISO 3309 protocol is used primarily in the
field of GSM cellular communications, as with Mobile
ISDN.

The AVM ISDN-Controller T1/T1-B conforms to the
ITU-T I.431 recommendation and supports all 30 B
channels and the D channel of the S

2M

 interface at

64 Kbit/s. On the ISDN D channel, the T1-B supports
both the European DSS1 protocol and the national
protocol 1TR6. The controller has international approv-
als for use throughout Europe.

The driver software is available for the operating
platforms Novell NetWare, Windows NT and MS-DOS.

Several AVM ISDN-Controllers can be easily combined
in one PC. Up to four active AVM ISDN-Controllers can
be operated simultaneously.

Installation of the ISDN-Controller hardware and soft-
ware completely connects the PC to ISDN.

1.3 Package Contents

The product includes:

• AVM ISDN-Controller T1/T1-B

• T1 PC interface card

• Power adapter

• Serial cable to connect the PC interface card to the

ISDN-Controller

• Cable to connect the ISDN-Controller to the S

2M

interface

• Four driver software diskettes

• One diskette containing the file transfer program

Connect2 for DOS

• AVM ISDN-Controller T1/AVM ISDN-Controller T1-B

manual

Summary of Contents for T1
























































Reviews:

No comments