
27
3 Driver Software Installation – Windows NT
3.2.2 Loading and Unloading the ISDN-Controller
The AVM ISDN-Controller T1/T1-B is installed in Win-
dows NT as a service, and is therefore loaded automati-
cally each time Windows NT is started. This takes place
before programs in the Startup group run, so that you
may include CAPI-based communications programs in your
Startup group if desired.
If you would like to disable automatic loading of the ISDN-
Controller, run the T1 Setup program in the AVM group.
This program allows you to enable and disable automatic
loading, change the D-channel protocol setting and change
the controller’s interrupt and I/O address settings.
To load the Controller manually, click on T1 Load in the
AVM group. When the ISDN-Controller has been loaded,
the following message appears:
Fig.
ISDN-Controller sign-on message in Windows NT
To remove the driver software from memory, click on T1
Unload. A message appears to confirm the operation.