
32
3 Driver Software Installation – Novell NetWare
AVM Berlin ISDN-Controller T1
COMMON-ISDN-API Version 2.0 Serial No. xxxxxxx
DSS1 / Release xxxxxx
Address xxx / IRQ x
Add. Service: GSM, V.110
Fig.
ISDN-Controller sign-on message in Novell NetWare
The CAPI 2.0 interface is now available to the entire
system.
To remove the driver software from memory, enter
load capi20 -d
and press Return. The system acknowledges the com-
mand with an appropriate message.
3.3.1.3 Installing Additional ISDN-Controllers
If you want to operate several AVM ISDN-Controller
T1s/T1-Bs in one computer, you must first assign each
PC interface card a unique card number. See the instruc-
tions in Chapter 2, “Hardware Installation”.
Enter the command
load t1setup
at the server console. In the list of available ISDN-Control-
lers, press Ins. A new ISDN-Controller entry is shown with
an available I/O address and interrupt level for the PC
interface card.
3.3.1.4 Removing the ISDN-Controller
To undo the installation of the AVM ISDN-Controller T1/
T1-B in Novell NetWare 3.x or 4.x, proceed as follows:
1.
At the system console, type
load install
and press Return.