
26
3 Driver Software Installation – Windows NT
The default is C:\IDRIVER. You may confirm this or
enter any other directory name. When your entry is
complete, confirm by clicking on OK.
To return to the previous dialog, click on the Go
back button.
7.
Select the D-channel protocol used by your ISDN line
(DSS1 or 1TR6). Click on the desired entry, then on
Continue.
8.
In the next dialog you must select the I/O address to
be used in the system for the PC interface card.
The first card always uses the I/O address 150.
9.
Next, indicate the interrupt level (IRQ) for the PC
interface card.
10. Then enter the Card-ID (board number) of the PC
interface card. This is the number determined by the
DIP switch settings on the card.
If you want to operate several AVM ISDN-Controller
T1s/T1-Bs in one computer, you must first set the
DIP switches on each PC interface card to a unique
card number. See the instructions in Chapter 2,
“Hardware Installation”.
Now the installation routine copies all files to the specified
folder. In the Program Manager or Start menu, you will find
a new program group named AVM. This group contains
the icons T1 Load, T1 Unload, T1 Setup, T1 Test, T1
Readme and AVM Internet Home Page (Windows NT
4.0 only: this is a link to AVM’s Internet site, and requires
Internet access and a WWW browser).
Finally, a message box displays the current configuration
of the ISDN-Controller. Click on OK to acknowledge and
close the window. To complete the installation, Windows
NT must now be restarted.
This done, you may start the AVM ISDN-Controller T1/
T1-B.