80
4.9.4
To Setup Send E-mail Setting:
Beside the Send Email check box, click
Detail
. In the E-mail Setting dialog box, click
OK
to exit and save the
setting and
Cancel
to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification, enable
Authentication
check box and enter User ID and Password.
(2) Mail
To check if it is working, click
Test Account
button.
From:
Enter the sender e-mail address.
To and CC:
Enter the recipient email address and separate it with comma or a semicolon (;).
Subject:
Enter the message title.
Message:
Type the message.
(3) Email Notice Setting
Notice Interval
Set the period of time before it sends another e-mail notice.
Embedded image
Select the image size and set the number of frames.
Attach image when sensor is triggered
When the sensor is triggered, the system will capture the image
and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting
If you are using dial up modem, enable
Auto Dial up
check box and select the modem name. You may also
set the time to disconnect automatically, just enable the
Auto Disconnect after
check box and set time.
4.9.5
To Setup FTP Setting:
1. Beside the File Transmission via FTP check box, click
Detail
.
2. In the FTP Setting dialog box, enter the FTP IP, port, user ID
and password.
3. In
Number of Pic
text box, enter the number of sequence
images that want to send when file is transmitting.
4. In
Upload image when sensor is triggered
, select the
camera that the images will be capture and send when the
sensor is triggered.
5.
Click
OK
to exit and save the setting and
Cancel
to exit
without saving the setting.
