Avermedia SA5104, User Manual

Page: 71 / 152

65
4.4 Network Setting
In the Network Setting dialog box, click
OK
to accept the new settings, click
Cancel
to exit without saving,
and click
Default
to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible
via internet using WebViewer, Remote Console, PDAViewer and Hand Viewer (still image). To select all the
cameras, enable the
ALL
check box.
(3) Server IP
Set the Server IP and Remote Console Port number. The system will automatically detect your Server IP
address. You need this when accessing DVR server from the remote location via internet.
(4) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http://Appendix B
) You will be prompted to enter CD key number, product name, password, and user
information. Use this service if the IP address changes each time when you connect to internet.
(5) Remote Control Server
Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port in
Port
column. The default value is 5555.
i
User also can manually run this function. To run, click
Start
>
Programs
>
DSS
>
Tool
>
Remote
Control Server
. The remote control server icon appears on the taskbar when the remote
control server is enabled. (also see Chapter 11 )
(6) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust
bar to set the
Quality level
and
FrameRate level
.
(7) Webcam Port
Activate
Enable Anonymous Login
to remotely access the DVR server without the need of password and
Talk to Web-Client
to use the 2-Way Talk feature that allows the client and server to talk via internet using
microphone. Make sure both microphone and speakers work before using this feature.
If the
Talk to Web-Client
is disabled, the person in the DVR server side can only hear the voice from the
client side that is when the WebCam 2-Way Talk button is activated. (see also Chapter 7.1 #6 ).
i
Make sure that your Webcam Digital Signature is updated yearly; else you won’t be able to access
the DVR server from the DVR WebViewer. To update/download your WebViewer Digital Signature,
click
Update WebViewer Digital Signature
. Make sure your PC is connected to internet.