76
-
6. In
(5) Alarm Reset
, click the camera number (01 to 16) to set the reset condition of alarm. Once alarm
is reset, all alarm action will stop at the moment. If the sensor normal status is high, set the sensor
condition to low.
To set sensor status of IP camera, click
IP Camera Sensor
. In IP Camera Alarm Setting windows, click
High
/
Low
to set sensor status.
7. In
(6) Action
,
you may now set the alarm action for the system to perform when the alarm condition is
activated.
-
Launch EMAP
Display mini EMAP screen.
-
TV Out
Switch to only display the video on TV from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be displayed on TV
when the alarm is triggered.
~
Alarm Camera:
when a channel has an alarm occurred, and then, the channel video
that has an alarm occurred will be displayed on TV.
~
Camera #(1~32):
select the camera channel video that wants to be displayed on TV
when an alarm is activated.
b.
Retrieve time:
set the waiting duration before system switching back to original display mode
on TV automatically. If the retrieve time is un-mark, the alarm video will keep displaying until
user switch back to normal display mode manually. The retrieve time range is 3~ 600
seconds.
