manualshive.com logo in svg

Avaya Scopia XT Executive, User Manual, Page: 9 / 108

Share
Download
Avaya Scopia XT Executive User Manual Download Page 9

works with a wide variety of endpoints, including H.323, SIP, Scopia

®

 Desktop Clients, Scopia

®

Mobile devices, and ISDN endpoints (via Scopia

®

 100 Gateway).

This section provides an overview of each model in the XT Series product line. To easily compare
the different Avaya Scopia

®

 XT Series endpoints, see 

Comparing Between XT Series Models

 on

page 13.

The Avaya Scopia

®

 XT Series includes the following models:

• Avaya Scopia

®

 XT7000 Series

Designed for top performance and quality, the XT7000 Series offers excellent video quality
(1080p video at 60 frames per second) while saving on bandwidth costs. With the new H.265
video compression standard, you can have the same high quality video while consuming less
bandwidth (up to 50%, relative to endpoints with H.264 High Profile).

For unparalleled large room coverage, you can connect two PTZ cameras and two 3-way
Microphone Pods. The 3-way Microphone Pod provides superb signal-to-noise ratios, which
isolates speakers' voices over background noise and gives a crisp high quality sound.

Figure 2: Avaya Scopia

®

 XT7000 Series

• Avaya Scopia

®

 XT5000 Series

With HD video resolution of up to 1080p video at 60 frames per second (fps), the XT5000 sets
the standard for an exceptional videoconferencing experience, and is designed for easy setup
and control.

The 3-way Microphone Pod provides superb signal-to-noise ratios, which isolates speakers'
voices over background noise and gives a crisp high quality sound. You can also add a second
microphone for unparalleled large room coverage.

The XT5000 720 provides HD video resolution of 720p at 60 fps and 5x optical zoom, with the
option to upgrade to 1080p at 60fps and 10x optical zoom.

About the Models in the XT Series Product Line

April 2015

Avaya Scopia

®

 XT Series User Guide     

9

Comments? [email protected]

Summary of Contents for Scopia XT Executive













































































































Reviews:

No comments