Show Status
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 74
10.9 Show Status - Active Sensors
This menu is specifically related to fan control functionality where
smoke sensors are used (a smoke sensor is a detector that is defined
as a “Smoke Sensor” in the configuration, meaning that the detector
cannot be used for regular fire alarms). When a “smoke sensor”
detects smoke it will become active (Active Sensors).
By operating the menu (1 Show Status, 7 Active Sensors) a list of all
active Smoke Sensors (those which have detected smoke) will be
shown.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SHOW STATUS, press 1.
3
To select ACTIVE SENSORS, press 7.
4
If there are several active smoke sensors, use
the arrow buttons to scroll though the list of
points.
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SHOW STATUS
1 FIRE ALARMS
2 FIRE WARNINGS
3 FAULTS
4 DISABLEMENTS
5 DETECTION ZONES IN TEST
6 ACTIVATED OUTPUTS
7 ACTIVE SENSORS
8 OIL&GAS INHIBITED POINTS
19:23