Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 119
Step
Actions to be taken
Display Indication
Comments:
If the event log consists of one page or less, the
READ FORWARD / BACKWARD buttons will
reverse the order of the events.
You can also scroll up and down with the arrow
buttons (6 and 9).
6
To return to the LOG menu, press the
Close Window button
14.4.4 The Log Setup Menu
The submenu Log Setup includes the menu selections Read
Parameter, Read Filter and Clear Log.
In this menu you can determine how the information is to be presented
when you enter menu selections 1-8 in the LOG menu. You can,
for
example
, setup the LOG menu so that only Fire Alarms from a specific
date/time will be shown when you enter LOG FIRE ALARMS (menu
selection 1 in the LOG menu).
Read Parameters
This menu selection allows you to determine the read parameters:
Read mode,
including
; Most recent, Continue, From time
From Date and Time
Read Direction (forward/backwards)
Number of Entries
Read Filter
This menu selection allows you to determine the
units
that are to be
logged (for example, Points, FAD, Loop units etc.).
Note that when leaving the Control Menu,
Read Parameters
and
Read
Filter
are reset to default values.
Clear Log
This menu selection allows you to clear the entire Log Menu for all
events previously recorded.
SERVICE
1 FIRE ALARMS
2 PREALARMS
3 EARLY WARNINGS
4 FAULTS
5 DISABLE/ENABLE
6 USER OPERATIONS
7 TESTS
8 ALL EVENTS
9 LOG SETUP
19:23
LOG
