Show Status
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 66
10.3 Show Status - Fire Alarms
This menu gives detailed information on the current status of fire
alarms in the system. It provides the following information:
the location
the exact time of activation
an identification of the detectors (address)
the type of detectors (optical, heat, etc.)
all detectors in alarm
all activated outputs
The
example
below describes how to view the current status of fire
alarms.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SHOW STATUS, press 1.
3
To select FIRE ALARMS, press 1.
4
To move the cursor to the desired selection,
scroll with the arrow buttons
5
To view detailed zonal information for the
selected detection zone, press
6
To view point(s) in alarm for the selected
detection zone, press Action Digit 1 (SHOW
POINTS).
7
To return (each step backwards), press the
Close Window button
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SHOW STATUS
1 FIRE ALARMS
2 FIRE WARNINGS
3 FAULTS
4 DISABLEMENTS
5 DETECTION ZONES IN TEST
6 ACTIVATED OUTPUTS
7 ACTIVE SENSORS
8 OIL&GAS INHIBITED POINTS
19:23
