manualshive.com logo in svg

Automationdirect.com DirectLOGIC DL205 Series, User Manual

The Automationdirect.com DirectLOGIC DL205 Series offers reliable and efficient programmable logic controllers for industrial automation. Easily access the user manual for free download on manualshive.com, providing comprehensive instructions for setup and operation. Get the most out of your DL205 Series with the detailed manual at your fingertips.

Share
Download
background image

DL205 User Manual, 4th Edition, Rev. B

xix

Table of Contents

Comparative Boolean Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–4

Bit of Word Boolean Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–13

Immediate Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–14

Timer, Counter and Shift Register Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .C–15

Accumulator Data Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–16

Logical Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–18

Math Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–20

Differential Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–23

Bit Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–24

Number Conversion Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–25

Table Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–25

CPU Control Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–27

Program Control Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–27

Interrupt Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–28

Network Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–28

Intelligent I/O Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–28

Message Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–29

RLL

PLUS

Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–29

DRUM Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–29

Clock / Calender Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–30

Modbus Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–30

ASCII Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C–30

Appendix D: Special Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–1

DL230 CPU Special Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–2

Startup and Real-Time Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–2
CPU Status Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–2
System Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–2
Accumulator Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–3
Counter Interface Module Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–3
Equal Relays for Multi-step Presets with Up/Down Counter #1 / DL230
(for use with a Counter Interface Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D–4

Summary of Contents for DirectLOGIC DL205 Series












































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DirectLOGIC DL205 Series

Farris Engineering 2600 Series General Installation And Maintenance Instructions preview
2600 Series
Brand: Farris Engineering Pages: 12
Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Brand: Eastern Times Technology Pages: 4
Vacon 10 Quick Manual preview
10
Brand: Vacon Pages: 18
Samson 3296 Mounting And Operating Instructions preview
3296
Brand: Samson Pages: 100
Danfoss JS120 Technical Information preview
JS120
Brand: Danfoss Pages: 16
Radio Shack Remote Control Owner'S Manual preview
Remote Control
Brand: Radio Shack Pages: 3
Watts 1717 Installation Instruction preview
1717
Brand: Watts Pages: 2
Hanbay RC Series Manual preview
RC Series
Brand: Hanbay Pages: 18
BabySafe LUCKY Instruction preview
LUCKY
Brand: BabySafe Pages: 24
Laird RM186 Hardware Integration Manual preview
RM186
Brand: Laird Pages: 38
Laird BL600 Series Application Note preview
BL600 Series
Brand: Laird Pages: 5
Paradox PCS300 Reference And Installation Manual preview
PCS300
Brand: Paradox Pages: 32
M-system R1C-GH Instruction Manual preview
R1C-GH
Brand: M-system Pages: 13
WAGO 751-3502 Manual preview
751-3502
Brand: WAGO Pages: 16
S&C IntelliCap Operation preview
IntelliCap
Brand: S&C Pages: 26
Soundoff Signal nERGY bluePRINT ENGCP15001 Programming Manual preview
nERGY bluePRINT ENGCP15001
Brand: Soundoff Signal Pages: 5
nvent 1244-006265 Manual preview
1244-006265
Brand: nvent Pages: 4
ICP DAS USA tM-P3R3 Quick Start Manual preview
tM-P3R3
Brand: ICP DAS USA Pages: 6

Brands by name

Popular brands

Load more brands