manualshive.com logo in svg

Automationdirect.com DirectLOGIC DL205 Series, User Manual

The Automationdirect.com DirectLOGIC DL205 Series offers reliable and efficient programmable logic controllers for industrial automation. Easily access the user manual for free download on manualshive.com, providing comprehensive instructions for setup and operation. Get the most out of your DL205 Series with the detailed manual at your fingertips.

Share
Download
background image

10BaseFL Network Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–25
Maximum Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–25
Add a Serial Remote I/O Master/Slave Module . . . . . . . . . . . . . . . . . . . . . . . . . . .4–26
Configuring the CPU’s Remote I/O Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–27
Configure Remote I/O Slaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–29
Configuring the Remote I/O Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–29
Remote I/O Setup Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–30
Remote I/O Test Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–31

Network Connections to Modbus and

Direct

Net . . . . . . . . . . . . . . . . . . . . . . . . . .4–32

Configuring Port 2 For

Direct

Net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–32

Configuring Port 2 For Modbus RTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–32
Modbus Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–33

Direct

NET Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–34

Network Slave Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–35

Modbus Function Codes Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–35
Determining the Modbus Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–35
If Your Host Software Requires the Data Type and Address . . . . . . . . . . . . . . . . . .4–35
If Your Modbus Host Software Requires an Address ONLY . . . . . . . . . . . . . . . . . . .4–38
Example 1: V2100 584/984 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–40
Example 2: Y20 584/984 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–40
Example 3: T10 Current Value 484 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–40
Example 4: C54 584/984 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–40
Determining the

Direct

NET Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–40

Network Master Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–41
Communications from a Ladder Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–44
Multiple Read and Write Interlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–44

Network Modbus RTU Master Operation (DL260 only) . . . . . . . . . . . . . . . . . . . .4–45

Modbus Function Codes Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–45
Modbus Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–46
RS–485 Network (Modbus only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–47
RS–232 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–47
Modbus Read from Network (MRX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–48
MRX Slave Memory Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–49
MRX Master Memory Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–49
MRX Number of Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–49
MRX Exception Response Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–49
Modbus Write to Network (MWX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–50

DL205 User Manual, 4th Edition, Rev. B

viii

Table of Contents

Summary of Contents for DirectLOGIC DL205 Series












































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DirectLOGIC DL205 Series

NEC NEAX 2400 ICS Manual preview
NEAX 2400 ICS
Brand: NEC Pages: 149
NEC LED-E012i User Manual preview
LED-E012i
Brand: NEC Pages: 13
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Brand: Ohsung Electronics Pages: 18
Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Brand: Baccara Pages: 16
BABYSTYLE OYSTER Instruction Manual preview
OYSTER
Brand: BABYSTYLE Pages: 8
BABYSTYLE Hybrid 2 Manual preview
Hybrid 2
Brand: BABYSTYLE Pages: 32
Fantech ECO-TOUCH Operating Manual preview
ECO-TOUCH
Brand: Fantech Pages: 2
Federal Signal Corporation FC Description, Specifications, Installation, Operation, And Service Manual preview
FC
Brand: Federal Signal Corporation Pages: 34
M-system SC100 Series Applications Manual preview
SC100 Series
Brand: M-system Pages: 103
M-system MSP40 Instruction Manual preview
MSP40
Brand: M-system Pages: 18
M-system 47LV Specifications preview
47LV
Brand: M-system Pages: 7
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
B&G ZEUS S Detailed App Manual preview
ZEUS S
Brand: B&G Pages: 19
Watlow DIN-A-MITE C User Manual preview
DIN-A-MITE C
Brand: Watlow Pages: 20
CIAT CIATControl OPC Server Installation And Operating Instructions Manual preview
CIATControl OPC Server
Brand: CIAT Pages: 32
Danfoss AFD 2 VFG 2 Operating Manual preview
AFD 2 VFG 2
Brand: Danfoss Pages: 8
Bailey Infi 90 IMAOM01 Instructions Manual preview
Infi 90 IMAOM01
Brand: Bailey Pages: 44

Brands by name

Popular brands

Load more brands