manualshive.com logo in svg

Automationdirect.com DirectLOGIC DL205 Series, User Manual

The Automationdirect.com DirectLOGIC DL205 Series offers reliable and efficient programmable logic controllers for industrial automation. Easily access the user manual for free download on manualshive.com, providing comprehensive instructions for setup and operation. Get the most out of your DL205 Series with the detailed manual at your fingertips.

Share
Download
background image

Standard Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–2
Air Quality Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–2
Low Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–2
CPU Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–2

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–3

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–3
Fatal Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–3
Non-fatal Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–3
Finding Diagnostic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–4
V-memory Locations Corresponding to Error Codes . . . . . . . . . . . . . . . . . . . . . . . .9–4
Special Relays (SP) Corresponding to Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . .9–5
I/O Module Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–6
Error Message Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–7
System Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–8
Program Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–9

CPU Error Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–10

PWR Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–11

Incorrect Base Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–11
Faulty CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–11
Device or Module causing the Power Supply to Shutdown . . . . . . . . . . . . . . . . . .9–12
Power Budget Exceeded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–12
Run Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–13
CPU Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–13
BATT Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–13

Communications Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–13

I/O Module Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–14

Things to Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–14
I/O Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–14
Some Quick Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–15
Testing Output Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–16
Handheld Programmer Keystrokes Used to Test an Output Point . . . . . . . . . . . . . .9–16

Noise Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–17

Electrical Noise Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–17
Reducing Electrical Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–17

Machine Startup and Program Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .9–18

DL205 User Manual, 4th Edition, Rev. B

xvi

Table of Contents

Summary of Contents for DirectLOGIC DL205 Series












































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DirectLOGIC DL205 Series

J4C 20 Mounting Instructions preview
20
Brand: J4C Pages: 4
ABB ACH550 series Quick Start Manual preview
ACH550 series
Brand: ABB Pages: 6
T-Verter E2 Series Operating Manual preview
E2 Series
Brand: T-Verter Pages: 121
Happy 1050 Installation & Use Instructions preview
1050
Brand: Happy Pages: 10
Salda FLEX Service Manual preview
FLEX
Brand: Salda Pages: 20
Paradox Digiplex DGP-848 Reference And Installation Manual preview
Digiplex DGP-848
Brand: Paradox Pages: 20
OMC W150 Installation And Maintenance Instruction preview
W150
Brand: OMC Pages: 18
Paradox REM3 Reference And Installation Manual preview
REM3
Brand: Paradox Pages: 2
Paradox IP150+ Programming Manual preview
IP150+
Brand: Paradox Pages: 2
Paradyne FrameSaver 9120 Installation Instructions Manual preview
FrameSaver 9120
Brand: Paradyne Pages: 20
Panduit VeriSafe VS2-NET Installation Manual preview
VeriSafe VS2-NET
Brand: Panduit Pages: 6
KEENZ XC Instruction Manual preview
XC
Brand: KEENZ Pages: 68
Zennio KLIC-DI User Manual preview
KLIC-DI
Brand: Zennio Pages: 30
Zeta PREMIER EX8 User Manual preview
PREMIER EX8
Brand: Zeta Pages: 13
PUTCO 8770HF Installation preview
8770HF
Brand: PUTCO Pages: 2
Daihan Scientific WHM-C10D Operation Manual preview
WHM-C10D
Brand: Daihan Scientific Pages: 11
Dejero EM9191 Hardware Integration Manual preview
EM9191
Brand: Dejero Pages: 24
WINDY NATION CHC-LCD-30FM User Manual preview
CHC-LCD-30FM
Brand: WINDY NATION Pages: 16

Brands by name

Popular brands

Load more brands