DL205 User Manual, 4th Edition, Rev. B
Chapter 5: Intelligent Box (IBox) Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
CTRIO Configuration (CTRIO) (IB-1000)
CTRIO Config defines all the common information for one specific CTRIO module which
is used by the other CTRIO IBox instructions (for example, CTRLDPR - CTRIO Load
Profile, CTREDRL - CTRIO Edit and
Reload Preset Table, CTRRTLM -
CTRIO Run to Limit Mode, ...).
The Input/Output parameters for this
instruction can be copied directly from
the CTRIO Workbench configuration
for this CTRIO module. Since the
behavior is slightly different when the
CTRIO module is in an EBC Base via
an ERM, you must specify whether the
CTRIO module is in a local base or in an
EBC base.
You must have the CTRIO Config IBox at the top of your ladder/stage program along with
any other configuration IBoxes.
If you have more than one CTRIO in your PLC, you must have a different CTRIO Config
IBox for EACH CTRIO module in your system that utilizes any CTRIO IBox instructions.
Each CTRIO Config IBox must have a UNIQUE CTRIO# value. This is how the CTRIO
IBoxes differentiate between the different CTRIO modules in your system.
The Workspace parameter is an internal, private register used by the CTRIO Config IBox
and MUST BE UNIQUE in this one instruction and MUST NOT be used anywhere else in
your program.
CTRIO Parameters
• CTRIO#: specifies a specific CTRIO module based on a user defined number
• Slot: (local base): specifies which PLC slot is occupied by the module (always K0 for EBC base)
• Workspace: specifies a V-memory location that will be used by the instruction
• CTRIO Location: specifies where the module is located (PLC local base or ERM to EBC base)
• Input (local base): This needs to be set to the same V-memory register as is specified in CTRIO
Workbench as ‘Starting V address for inputs’ for this unique CTRIO.
• Output (local base): This needs to be set to the same V-memory register as is specified in CTRIO
Workbench as ‘Starting V address for outputs’ for this unique CTRIO.
• Word Input (EBC base): The starting input V-memory address as defined by the I/O configuration
in the ERM Workbench
• Bit Input (EBC base): The starting input Bit address as defined by the I/O configuration in the
ERM Workbench
• Word Output (EBC base): The starting output V-memory address as defined by the I/O
configuration in the ERM Workbench
• Bit Output (EBC base): The starting output Bit address as defined by the I/O configuration in the
ERM Workbench
DS5
Used
HPP
N/A
CTRIO in Local Base
CTRIO in EBC Base
ý
ý
þ
þ
230
240
2
5
0
-1
2
6
0
5–330
