Do-more H2 Series PLC User Manual, 1st Edition, Rev. F - H2-DM-M
7–6
Chapter 7: Specifications - Specialty Modules
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
The module configuration of the H2-CTRIO2 is done from within the Edit
CTRIO/CTRIO2 Configuration window seen below. The Configure I/O..., Input Filters...,
Discrete Tables... and Pulse Profiles... buttons in the left hand column will allow you to
configure the input and output functions of the selected module. Refer to the Do-more
Designer Help File for more information on configuration options.
The above window can be accessed once the H2-CTRIO2 module is added to the I/O
configuration either manually or automatically. See the Verify Hardware Configuration
section of the Getting Started chapter for more information on setting up the I/O
configuration. With the module added, select the Module Configuration(s) entry from the
System Configuration page. Then choose the desired module and select Edit Config.
H2-CTRIO(2) Configuration
