Do-more H2 Series PLC User Manual, 1st Edition, Rev. F - H2-DM-M
6–18
Chapter 6: Specifications - Analog I/O Modules
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
F2-08AD-2, Analog Input - continued
F2-08AD-2 Addressing
The Do-more CPU module assigns the following memory addresses to this module.
Xn: Starting X address assigned to this module
WXn: Starting WX address assigned to this module
F2-08AD-2 X Addressing
Address
Description
Xn
On when the external 24VDC input power is missing or terminal block is removed.
Xn+1
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 2 input is not used)
Xn+2
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 3 input is not used)
Xn+3
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 4 input is not used)
Xn+4
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 5 input is not used)
Xn+5
On when the external 24VDC input power is missing or terminal block is
removed. (This address stays off if Channel 6 input is not used)
Xn+6
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 7 input is not used)
Xn+7
On when the external 24VDC input power is missing or terminal block is removed.
(This address stays off if Channel 8 input is not used)
F2-08AD-2 WX Addressing
Address
Description
WXn
Channel 1 Input Data (0 to 4095 or -4095 to 4095)
WXn+1
Channel 2 Input Data (0 to 4095 or -4095 to 4095)
WXn+2
Channel 3 Input Data (0 to 4095 or -4095 to 4095)
WXn+3
Channel 4 Input Data (0 to 4095 or -4095 to 4095)
WXn+4
Channel 5 Input Data (0 to 4095 or -4095 to 4095)
WXn+5
Channel 6 Input Data (0 to 4095 or -4095 to 4095)
WXn+6
Channel 7 Input Data (0 to 4095 or -4095 to 4095)
WXn+7
Channel 8 Input Data (0 to 4095 or -4095 to 4095)
