manualshive.com logo in svg

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual, Page: 316 / 414

Share
Download
Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 316

Choose Finish.

Inserting Springs

Drag the cursor dynamically to switch between the selected possible springs.
The outline of the spring is displayed in the drawing and the spring description
is displayed in the tooltip.

To insert a spring

1

Drag the cursor until the tooltip reads SPEC - 1.6 x 14.1 x 36, and then
click.

2

Respond to the prompts as follows:

Topical Length (14.28 - 36) [Force/Deflection] <32.01>:

Select a point on the spring pressure plate (1)

3

Continue to respond to the prompts as follows:

Select rod (only closed contours) <Enter=continue>:

Press

ENTER

The spring is inserted as shown below.

308 | Chapter 15   Calculating Springs

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Reviews:

No comments