Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 149

Page: 149 / 414

Add a single dimension with a fit using Power Dimensioning.

To add a dimension with a fit

Start Power Dimensioning. On the command line, enter

AMPOWERDIM

Respond to the prompts as follows:

Specify first extension line origin or

[Linear/Angular/Radial/Baseline/Chain/Options/Update] <select

object>:

Select the first point (1)

Specify second extension line origin:

Select second point (2)

Specify dimension line location or

[Horizontal/Vertical/Aligned/Rotated/Placement options]:

Drag the dimensioning to the left until it is highlighted red, and then click

Editing Dimensions with Power Commands | 141

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Search results

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009

Reviews:

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual, Page: 149 / 414

Search results

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009

Reviews: