manualshive.com logo in svg

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual, Page: 247 / 414

Share
Download
Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 247

NOTE

The start and endpoints of the centerline are only important in

determining the direction. The length of the centerline is automatically
adapted to the length of the shaft.

3

In the Shaft Generator dialog box, click Options.

4

In the Shaft Generator - Configuration dialog box, specify:

For Segment inserted:

Insert

Stationary Shaft End:

Left

Adjust Centerline:

Yes

Front View:

Radius Reflection Line, Check contour

Side and Sectional Views:

Sectional with Background, Always update

View of Interrupt:

Hatch

If shaft is in background, hide standard part too:

 Yes

Configuring Shaft Generators | 239

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Reviews:

No comments